Also for pharmaceutical applications, we recently supplied three TREG temperature control units for silicone fluids in glass-lined reactors. This is a classic mono-fluid temperature control application, equipped with heating via electric resistors and a low-temperature cooling section (-30°C) using brazed plate heat exchangers and mixing valves.

Temperature ramps control is achieved through dedicated electronic thermoregulators and thyristors (SCR), which allow the customer to drive the heating elements with modulating power. Finally, the thermal control units work with special pumps, featuring magnetic drive technology and a very wide temperature range of -30/+300° C.

L'articolo Temperature control units for reactors at -30° C in the pharma industry proviene da Tempco Blog.

Mostra fiera idrogeno is a vertical event, now in its sixth year, organized by EIOM Fiere and dedicated to the wide range of the most innovative industrial technologies and solutions for the hydrogen supply chain.

You can pre-register for the event on this page.

Tempco’s PCHE exchangers represent an innovative technology that offers high performance to meet the critical requirements of hydrogen applications, such as extreme pressures and variable temperatures. The construction by diffusion bonding, or solid-state welding, of the plate pack allows these exchangers to operate at pressures up to 900 bar and beyond, thanks to their high structural integrity, which ensures operational reliability and high safety.

The photo-etching technique empployed for the plates allows to create customized layouts of heat transfer microcircuits, allowing PCHEs to be built in multistream mode, as required by the multistage compressors used in hydrogen refueling stations. This ensures extremely high heat transfer efficiency, rapid refueling, and installation in small spaces thanks to the exchanger’s highly compact design.

mcT Hydrogen is held concurrently with several other events, including mcT Oil & Gas and Security, a sector in which Tempco PCHE exchangers find equally important and interesting applications, such as pre-heaters in high-performance turbines and on GLN extraction platforms for gas cooling.

L'articolo Tempco’s PCHE exchangers at the mcT Hydrogen on April 14 proviene da Tempco Blog.

Brazed plate heat exchangers are the ideal solution for these plants thanks to their compactness, high thermal efficiency, and total maintenance-free operation. Compared to traditional shell-and-tube heat exchangers, they offer a series of concrete advantages that make them particularly suitable for modular, high-power density installations in small spaces.

The choice of Tempco
In Tempco hydraulic power plants, brazed plate heat exchangers are custom-sized based on the customer’s operating conditions:

• flow rates
• viscosity
• operating temperature
• heat dissipation duty

The use of copper or nickel-brazed stainless steel heat exchangers ensures high corrosion resistance and long operating life, with consistent thermal performance over time. Their compactness and reliability make them the perfect choice for high-performance systems, where every detail counts to ensure operational continuity and energy savings.

In short, brazed plate heat exchangers maximize thermal transfer efficiency and reduce overall dimensions, simplifying maintenance and improving the reliability of hydraulic power plants.

L'articolo Brazed plate heat exchangers in hydraulic power plants proviene da Tempco Blog.

CRN (Canadian Registration Number) number is a unique code issued by Canadian provincial/territorial authorities, required for the installation and use of pressure equipment, such as boilers, heat exchangers, pressure vessels, and fittings (fittings, valves, piping) in Canada. CRN certification is mandatory for equipment operating at pressures above 15 psig (approximately 1 bar) and, in the case of Tempco, ensures that the design and engineering of our brazed heat exchangers comply with Canadian safety standards.

A key safety requirement for importing and installing pressure-bearing components in Canada, this new certification, combined with the ASME certification, ensures that Tempco brazed plate heat exchangers comply with Canadian industry standards. Specifically, the CRN code is valid for installation of our brazed plate exchangers in the provinces of Ontario (ON), Quebec (QC), British Columbia (BC), Alberta (AB), and Saskatchewan (SK).

This new certification for installations in the Canadian market adds to the certifications Tempco has achieved over the years for its thermal control and industrial thermoregulation solutions such as ATEX for operation in potentially explosive atmospheres, such as in the chemical, petrochemical, and pharmaceutical sectors, and the ones for our TREG thermoregulation TCU units, which are UL certified for the North American market and EAC certified for Russia and the EAEU (Eurasian Economic Union) countries.

L'articolo Brazed plate exchangers with ASME certification and CRN code for Canada proviene da Tempco Blog.

Fuel cells are electrochemical devices that convert the chemical energy of hydrogen into electrical energy with high efficiency, producing water and heat as a byproduct. Green hydrogen (green H2) is therefore hydrogen generated from renewable energy sources, with no carbon emissions. Water electrolysis is the most commonly used method for hydrogen generation, using a chemical reaction that separates hydrogen from oxygen.

As a green energy, green hydrogen can therefore be used in a variety of sectors, replacing fossil fuels and promoting the energy transition. Green hydrogen can be used for fuel cells, but it can also serve as a direct energy source for aviation, marine, automotive, and heavy-duty transportation, as well as for on-site industrial power generation.

Regardless of the type of electrolytic cell technology – be it PEMEC (proton exchange membrane electrolyzer), AEMEC (anion exchange membrane electrolyzer), AEL (alkaline electrolyzer), SOEC (solid oxide electrolyzer), or any other electrolysis technology – brazed exchangers offer high-value, high-efficiency solutions for electrolysis equipment, electrolytes, reaction water and gas preheating, working fluid cooling, and system energy recovery.

For these hydrogen applications, Kaori offers two types of brazed plate exchangers: the high-nickel alloy exchangers are the ideal solution for high-temperature SOEC/SOFC applications, capable of operating at temperatures up to 900°C. The new full-stainless steel brazed exchangers use stainless steel as the brazing filler material. This makes them suitable for hydrogen generation via PEM electrolysis and for fuel systems, or for low-conductivity deionized water that does not allow the passage of copper ions.

L'articolo Brazed plate exchangers for hydrogen applications, electrolysis and fuel cells proviene da Tempco Blog.

Now we come to the final stage: forming and cooling, where the chocolate is poured into molds and finally takes its shape.

After tempering, the chocolate mass is rapidly cooled to crystallize uniformly and achieve the ideal consistency. Low, stable temperatures, around 10-15°C, are essential to ensure the chocolate solidifies without defects, such as air bubbles or irregular surfaces. TCU thermal control units also ensure that the process runs smoothly during this phase, avoiding thermal shocks that could compromise product quality. Furthermore, well-managed cooling speeds up production times and optimizes the efficiency of the production line.

The magic of chocolate ends with this phase, leaving us with perfect bars, ready to be packaged and enjoyed. A precision work that transforms each piece into a masterpiece!

L'articolo Thermal control units in chocolate forming and cooling  proviene da Tempco Blog.

The AI/HPC data centers sector is therefore accelerating its transition toward the use of large-scale liquid cooling technologies, driven by the achievement of sustainability targets and high power efficiency (PUE) values ​​in new, large, high-performance data centers. To address this significant trend, Kaori, a Tempco partner in the field of heat transfer, recently introduced two new heat exchangers with highly attractive features specifically designed for new liquid cooling solutions in high-performance infrastructures.

This is the B390 heat exchanger, which features an asymmetric plate design specifically designed for high-density AI and HPC data centers. With a cooling capacity of up to 2.000 kW and support for 4-inch high-flow connections, it easily manages the transient heat loads of next-generation high-power servers. Measuring only 321 mm in width and 751 mm in length, the B390 offers exceptional cooling performance in a compact footprint—perfectly integrating into In-Row CDU systems while maximizing space efficiency.

Optimized for the pressure drop differences on both sides of In-Row CDU systems, the B390 ensures stable flow distribution and higher overall performance. It is available in single or multi-pass configurations and supports vertical, horizontal, or flat installations, providing flexible integration for various system and space requirements in data center environments.

B390 continues the core advantages of Kaori’s B Series:

• Exclusive plate pattern design: maximizes heat transfer efficiency while maintaining low pressure drop.
• High working pressure construction: ensures long-term reliability for high-pressure liquid cooling systems.
• Compact design: pptimizes space utilization to meet high-density integration needs.

A second interesting heat exchanger model, also developed specifically for next-generation, high-density data center environments in the AI ​​era, is the K390. The same-sized K390 heat exchanger features a symmetrical plate design, ideal for balanced bidirectional flow systems.

Together, the B390 and K390 form a complementary solution, offering greater design flexibility and performance options for in-row liquid cooling architectures.

L'articolo High efficiency exchangers for liquid cooling in AI/HPC data centers proviene da Tempco Blog.

The project aims to transform waste treatment into an advanced energy process: increasing biomethane production while simultaneously converting non-recyclable waste into syngas (gas mixture obtained from the gasification of biomass or carbon-based waste), through thermochemical processes such as gasification and pyrolysis.

For these processes, heat regulation is critical: the heat supplied to the process must be stable, precise, and available at high temperatures. The Tempco control unit is therefore designed to ensure the required temperature regulation with maximum levels of safety and operational continuity of the system.

Our TREG meets these requirements precisely:

• It works with diathermic oil at high temperatures, ensuring proper thermal decomposition of the materials.
• ATEX certification, essential in environments with potentially explosive atmospheres.
• Remote control, which allows for remote management of process parameters, reducing on-site interventions and increasing operational continuity.

From waste to Syngas: a closed cycle
TREG’s seamless integration into the project therefore represents a concrete example of circular economy applied to energy, with a green perspective and fostering sustainable energy transition:

• Waste becomes a resource: materials that were previously a disposal cost are now transformed into an energy-rich gas.
• The district becomes more self-sufficient, thanks to a process that recovers value from flows considered to be at their end-life cycle, achieving circularity.
• Lower emissions and greater efficiency, because high-temperature thermoregulation makes the entire conversion cycle stable and reliable.

L'articolo Waste-to-energy and high-efficiency thermoregulation in circular economy proviene da Tempco Blog.

The installed TREG manages a temperature range from –5° C to +90° C, using glycol water as monofluid heat transfer. The unit delivers 24 kW of power in both the heating and cooling phases, allowing for extremely precise modulation of the operating conditions of the reactor’s double shell, depending on the different phases of the drug production process.

The full stainless steel construction and compact design facilitate cleaning and maintenance, ensuring full compliance with the sterile environment requirements of the pharmaceutical industry. Every detail, from components to electronics, is designed to offer reliability, repeatability, and safety in laboratory processes and small production batches for research activities of new active ingredients.

L'articolo Precise thermal control in pharmaceutical research proviene da Tempco Blog.

And this year again, we gladly take this opportunity to wish you Happy Holidays, a warm and Merry Christmas, and a New Year 2026 filled with… thermal Energy, green and sustainable as it can be.

Happy Holidays, from the entire Tempco team!

L'articolo Best wishes from Tempco, Happy Holidays and a New Year 2026 full of energy! proviene da Tempco Blog.